![]() ![]() NEXT YOU WILL PUT IN YOUR TEXT INSIDE THE RECTANGLE, SIZE THE TEXT AND PLACE IT WITHIN THE RECTANGLE WHERE YOU WANT IT, THEN DELETE THE RECTANGLE AND SAVE AS CUT2.DXF. ![]() LETS SAY YOU DREW A RECTANGLE AND IN IT YOU HAVE TEXT AND YOU WANT TO USE A V-BIT TO CUT THE TEXT AND A DIFFERENT BIT TO CUT THE RECTANGLE.įIRST DRAW THE RECTANGLE AND SIZE IT, THEN SAVE AS A DXF AS CUT1.DXF. I would do the 2d carving job separately from the v-bit carving because of the bit change (and v-bit carving specific software), correct? #Signmaking shotbot driverYOU WILL OPEN THE DXF FILE IN VECTOR AND CAN DO A ISLAND OR HATCH WITHIN THE PROGRAM THEN JUST USE THE SB DRIVER FOR VECTOR TO MAKE YOUR SBP FILE YOU COULD DO THAT, YOU WOULD GO TO EDIT-COPY ENTITIES- OFFSET, YOU WOULD FIRST SELECT A LINE THEN TYPE IN THE SIZE OF THE BIT YOU WILL BE USING AND HIT ENTER, THEN CLICK THE OUTSIDE OF THE LINE AND IT WILL OFFSET IT, THEN JUST DELETE THE INNER LINE.ĪS FOR ISLAND OR HATCHING, BEST TO USE A CAD/CAM PROGRAM FOR THAT, IF YOU ORDERED A MACHINE? I THINK VECTOR COMES WITH IT? CHECK WITH SHOPBOT TO SEE. IF YOU HAVE TURBOCAD I WOULD USE THAT TO DRAW YOUR FILE, YOU WILL NOT HAVE TO CONVERT TO CURVES, YOU WOULD ONLY NEED TO USE THE SPLINE TOOL THEN JUST SELECT WHAT YOU DREW WITH THE SPLINE TOOL AND EXPLODE IT OR JUST USE THE MULTILINE TOOL AND YOU WILL NOT HAVE TO EXPLODE ANYTHING, THIS WILL SET THE CUTTING ORDER TOO. I USED CORELDRAW 8-9-10 AND HAVE DIFFERENT RESULTS WITH THE SAME FILE EVERY TIME. DRAW THE FILE AND SELECT ALL AND CONVERT TO CURVES, YOU MIGHT HAVE TO EXPLODE IT FIRST?. ![]() SAVE THE FILE AS A CDR, THE REOPEN IT THEN EXPORT AS A DXF ORĢ. WHEN USING COREL YOU HAVE TO DO 1 OF 2 THINGS FIRSTġ. MOST CAD PROGRAMS WILL LET YOU USE FILL COLORS AND LET YOU PRINT IT I think I should still design in coreldraw as I can quickly and easily create and print out color roughs, proofs and design presentations, right? Thanks for your comments in advance as I haven't seen a specific project discussed from start to finish yet. Then I would finish, assemble and collect the check, right? This approach would be the quickest, easiest and most efficient (money-making) way to approach this job, right? I would export that to Millwizard () and create that, right? Next I would create my trout in a 3d modeling program (even a crude trout would be better than my hand carving skills and quaint, besides). ![]() I would do the 2d carving job seperately from the v-bit carving because of the bit change (and v-bit carving specific software), correct? Upon receiving the job I can convert type to curves, convert all objects to lines without fill and export as a dxf, right?įor the 2d carving I could import the dxf into Turbocad (or what?) and create the toolpaths, hog-outs and bit offsets, right? I think I should still design in coreldraw as I can quickly and easily create and print out color roughs, proofs and design prsentations, right? So, mostly 2d letter carving, hogging out, v-bit carving small (less than 3') type and some 3d accents (like borders, objects (like a trout, for instance) that can be appliqued on one sign. We are a small sign shop and want to offer an alternative to sandblasted signs which are 2d signs. OK, I've down a little homework here in prep for our shopbot which is on order. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |